A low Canon camera battery won’t do you any good, but if you don’t have your charger around, there are other ways to remedy the situation and take your high-quality shoots in no time. Below are the three easiest methods for charging your Canon camera without a charger.
How to Charge a Canon Camera without Charger
1. Charge Canon Camera Battery with Wall Plug
One of the easiest ways to charge a Canon camera battery is with a wall plug
If you camera doesn’t have a power cord. You need to take some precautions when using the wall plug. Ensure that the power cord you go for is compatible with your Canon camera. Depending on what kind of Canon camera you own, it might have come with a compact power adapter or require the use of a USB charging cable.
If you don’t have a cable handy, you can get a replacement or have someone borrow you theirs. A fast charging, 3.1A will charge most Canon cameras. Try going for a USB 3.0 to USB-C or USB 2.0 Type A to Mini B.
To charge your Canon camera battery without a charger using a wall plug, follow the steps before
- Install the battery in your camera.
- Ensure that the camera is turned off. This is an important step to get the battery to charge. In some cases, the battery may not charge while the camera is turned on.
- You can now connect your USB cable to your camera. You’ll find this inside the rubber cover that hides your camera connections and ports.
- Connect your USB cable to your USB wall adapter. And plug it into the wall.
- The light will turn off after the battery is fully charged.
- The charging time is approximately 3 hours
- Avoid charging the battery for more than 24 hours because it can degrade the battery life.
2. Charging a Canon Camera Battery with a Power Bank
Another way to charge a Canon camera battery is by using a power bank.
This comes handy because you don’t need to look for a wall outlet.
Best Power Bank To Charge a Canon Camera
There are chances you already have a power bank, however, that might be able to charge your camera.
To charge your Canon camera with a power bank, you’ll need the USB-C Power Delivery feature. This is available on models from brands like Anker. .
Once you have the right power bank, check to confirm your power bank has enough power to charge your camera.
To check how much power you need to charge your camera battery: Take out the rechargeable battery from the camera. Look for the ratings and specifications that list how many mAhs (milliamperes) of energy your battery draws. This will tell you how big your power bank should be.
For example, if Canon battery requires 1,400 mAh. You will have to buy a power bank that puts out 30,000 mAh to easily charge your Canon camera battery. A smaller power bank with a specification of 10,000mAh can charge your battery up to 10 times if you have a 1000mAh battery.
To charge your Canon camera battery with a power bank, follow the steps below
- Install your camera battery in your camera.
- Turn the camera off as the battery may not charge while the camera is turned on.
- After that, you need to connect your USB cable to your camera. There is a protective cover that hides the cord connections to your camera. Open the cover and connect the power cord that came with the camera to the cord connection point on the camera.
- Connect the other USB end to the power bank.
- If your camera model allows it, you may be able to observe the LCD window on the top part that shows a battery icon. On the display, you can know how much of the battery needs to be charged.
- Check the back of the camera, there might be an indicator on the lower right-hand side. In most cameras, this will blink red if the battery is low and turn solid green to show the battery is charging.
- It usually takes a couple of hours to charge your battery. Wait a while and once the battery is charged, the green light will go out, and the battery icon on the top of the camera will show it is charged to full capacity.
- Ensure you double-check your power requirements and all settings to prevent charging problems when you eventually get your charger.
- Keep in mind that charging your Canon camera with a power bank is not the best solution as it could cause problems later on if used for the long term. You should only do this during emergencies.
- Checking your camera specs should reduce any risk of charging problems and maintain your battery life.
3. Charging a Canon Camera Battery with a Computer
If none of the other options are feasible, then you can consider charging your Canon camera battery with a computer
Keep in mind that this won’t work for all types of cameras. DSLRs or mirrorless cameras have a larger power draw and won’t charge using this method.
If you’re using a Canon point-and-shoot camera, this method might work for you. Check through the manual that came with your camera to know the kind of camera you have.
To charge your Canon camera battery using a computer, follow the steps below
- Insert the battery in your camera.
- You need to have a memory card installed in the camera because some cameras won’t charge if it’s not in place.
- Turn the camera off as the battery may not charge while the camera is turned on.
- After that, you need to connect your USB cable to your camera. There is a protective cover that hides the cord connections to your camera. Open the cover and connect the power cord that came with the camera to the cord connection point on the camera.
- Plug that cord into a USB plug-in your computer
- You may notice an indicator at the connection point that will light up while it’s charging. The charging time could take up to three hours.
- Once the battery is fully charged, the light will turn off.
- Keep in mind that charging your Canon camera with your computer is not the best solution as it could cause problems later on if used for the long term. You should only do this during emergencies.
